A remote start system is an automatic remotely controlled engine start, without the involvement of the driver. Motorists interested in such a prospect can take a look at our recommendations.
What is it - remote start?
The work of this system is quite simple. When a signal is received from a car timer or key fob in the hands of the driver, security interlocks are automatically disarmed and the starter is started. Successful motor start driver notified by flashing on the key fob lights or lights turned on. It is difficult to underestimate the functionality of this system, as it greatly simplifies the life of the driver.
Autostart for Toyota Camry 50 modification allows you to forget about the unpleasant moments when, sitting in the cold interior, trying to warm up the car.
The advantages of remote starting of the power unit include the following points:
adequate cost;
significant time saving;
the driver gets into a warm interior.
Of course, there are also disadvantages:
the battery tends to run out;
The use of a spare key bypasses the immobilizer, which you have to say goodbye to.
Choice of Autostart module
It is possible to install the system on the Toyota Camry 50 and other modifications with both manual and automatic transmission.
However, for cars with manual transmission, it is preferable to leave the gears off, since a strong jerk is possible when starting.
When deciding to purchase an auto-start module, you should first decide on the type of transmission and engine of your car. And also decide what is more preferable for you: remote engine start or automatic.
The first option provides the power on by simply pressing a button, being anywhere and at a convenient time. This allows you to start the engine of model 50 standing on the balcony, without going outside. True, provided that the balcony is located no further than 400 meters from the car.
Autostart sequence of installation
The principle of connecting the module of automatic starting of the power unit is as follows. First of all, from the ignition switch are unsoldered wires, thanks to which the engine is started. This should be done carefully, trying not to lean on the holes that exist in the steering wheel, working tools, to avoid damaging its liner. After that, the main wires coming from the autostart system are connected to the ignition. In this case, you should use the scheme specified in the manual.
If the car is equipped with an immobilizer, you will have to spend a little money to purchase an additional "bypasser" (a module designed to insert an additional ignition key). This will allow you to read the information from it and transmit it directly to the ignition.
Now connect the autostart control wire to the tachometer, alternator or oil sensor and program the unit in full accordance with the instructions. To be able to disable this system, you should extend an additional wire from the module to the hand or main brake. This procedure completes the installation of the autostart module on the Camry 40. As can be seen from the description, it does not require a grandiose investment and physical strength. It will only take a little thought over the electronics.
Summary
By installing an automatic engine start module on your car, you are guaranteed to get into a warmed up cabin.
-rear-and-front-view-camera-6.png)
